Innisfil, Ontario

Glass Upgrades in Innisfil, Our Home Base

This is home ground. Solar control, security reinforcement and switchable smart glass for lakefront homes, newer Alcona builds and the older streets inland, installed by our own two-person crew.

Request a Free Quote 705-481-3666
  • Rated 5.0 on Google
  • Our own crew, no subcontractors
  • Fixed all-in pricing
Red heritage general store with white trim on the main street in Cookstown, Innisfil
Main street, Cookstown Photo: Doug Kerr, CC BY-SA 2.0

51%

of solar heat rejected by our premium solar control grade

8-mil

high-tensile security layer bonded to the inside of the glass

99%+

of UV blocked by every solar, privacy and security grade we install

Working in Innisfil

Morning Glare and Close Neighbours

Innisfil runs from the lakefront at Alcona and Big Bay Point to the heritage main street in Cookstown, and the glass problems change along the way.

The town sits on the west shore of Lake Simcoe, so lakefront homes here face east. Everyone plans for afternoon sun. Few people plan for early summer light coming off flat water, low and hard, straight through a wall of glass built to frame the view. The only tool most people have is a blind, which trades the glare for the view they paid for.

Away from the water the issue flips. Alcona has grown quickly, and the newer streets were laid out with narrow side yards and generous windows. That puts second storey glass roughly level with the house next door. The same goes for the newer pockets around Lefroy and along Innisfil Beach Road.

Because so much of the housing here is recent, a lot of it has Low-E glass that is still under builder warranty. That is exactly why we test compatibility before quoting and leave the edges of every pane unsealed, so the sealed unit keeps breathing and the warranty stands.

Core Services

Solar Control and Security Reinforcement

Two services, each with published performance. Every quote lists the grade and what it measurably does, so you are comparing results rather than names.

Solar and Glare Control on Existing Glass

For heat, glare, fading and daytime privacy on residential and commercial glass. Applied to the interior surface and matched to your glass type, Low-E included.

Solar control

RatingHouse gradePremium grade
Solar heat rejected33%51%
Visible light transmitted68%65%
Glare reductionNot listed20%
UV blocked99%+99%+

Daytime privacy, house grade

Solar heat rejected46%
Visible light transmitted36%
UV blocked99%+

Worth knowing: daytime privacy works on a light difference. After dark with your lights on, the effect reverses. A premium privacy grade with a darker, more reflective exterior is also available.

Where it fits in Innisfil

  • East-facing lakefront living rooms
  • Side-yard windows in newer Alcona and Lefroy builds
  • Sidelights and stair glass in builder-grade entries

Decorative frosted, fluted and gradient finishes are also available for entries, partitions and storefront detail.

Solar and Privacy Details

Security Reinforcement for Existing Glass

An 8-mil high-tensile layer bonded to the inside of the glass. When the pane is struck it breaks but stays together in the frame, so a quick smash-and-grab becomes a slow, loud job.

8-mil
High-tensile layer thickness
Holds
Shattered glass stays in the frame on impact
Slows
Extends forced-entry time against smash-and-grab
99%+
UV blocked

Where it fits in Innisfil

  • Lakefront properties that sit empty through the week
  • Rear patio doors facing the yard
  • Ground floor glass beside a lock

What it does not do: it will not make glass unbreakable and it is not a replacement for an alarm. It buys time and noise, works alongside the alarm you have, and never needs to be armed.

Security Details

Figures are product ratings for the grades we currently install. Results on your windows depend on the glass, any coating and which way it faces, which is why every quote starts by identifying your glass.

Switchable Smart Glass

Smart Glass on Your Existing Windows

A self-adhesive switchable layer applied to the glass you already own and wired to a low-voltage transformer. Frosted for privacy, clear for the view, from a wall switch, remote or phone.

85%+
Light transmission in clear mode
92%+
Haze in private mode, fully obscured while still passing daylight
99.5%
UV blocked in private mode
<0.2 s
To switch from private to clear
<5 W
Per square metre while clear
Private
By default when the power is off

Worth knowing: clear mode is very clear but not quite bare glass, with a light haze under 4%. It also needs a power route to the glass, which we plan before quoting.

It suits bedrooms and ensuites facing a neighbour, where a blind would stay closed for good. The patio door shown here is an Innisfil install. Manufacturer ratings for the product we install.

Request a Smart Glass Quote How It Works
Sliding patio door with switchable smart glass set to private, both panes evenly frosted An Innisfil install, set to private
The Process

How Your Innisfil Project Runs

  1. Call or Request a Quote

    Tell us the room, the problem and roughly how much glass. If the job is under our minimum, we say so on the phone.

  2. Site Assessment

    We measure, identify your glass including any Low-E coating, and confirm which products are safe to put on it.

  3. Written Fixed Quote

    One all-in price with materials, labour and HST. Nothing is added at completion. A 50% deposit books the date.

  4. Installation

    Our own two-person crew. Most Innisfil homes take one day and a whole home two to three. Coverings fully cure within 30 days.

Pricing

What Innisfil Projects Cost

Starting at about $1,200

Innisfil projects start at about $1,200. That is not a price per window. It is the point where a day with a two-person crew works for both of us. Most finished work lands between $20 and $29 per square foot of glass, installed, with HST included. Innisfil is home ground, so there is no travel charge anywhere in town.

See real project costs from Simcoe County and Muskoka.

Included in every quote

  • Site assessment and glass identification before anything is quoted
  • Material and labour as one number
  • An employed two-person crew, never subcontracted
  • HST and travel inside the quoted price
  • Manufacturer warranty against bubbling, peeling, cracking and delamination
  • Twelve months on our workmanship against installation defects
Why Paneless Glass Solutions

Why Clients Pick Us Over a Window Company

Published Performance

Heat rejection, visible light and UV figures for every grade, on this page and on your quote. Compare us line by line with anyone.

Architectural Glass Only

Homes, cottages and commercial buildings. We do not do automotive work, so every job on the calendar is the work you are hiring us for.

Our Own Crew

Two people, no subcontractors, and one point of accountability from quote to finish. The person who measures is the person who installs.

Glass Checked First

Low-E, tempered and laminated glass are identified before quoting, so nothing goes onto glass it should not.

Your Warranty Protected

Edges are left unsealed so sealed units can breathe and your existing glass warranty stays intact.

Fixed, All-In Price

Materials, labour, travel and HST in one written number. The price on the quote is the price you pay.

Where We Work

The Alcona and Lefroy Lakeshore

Alcona

  • Innisfil Beach Road
  • Sandy Cove Acres
  • Jans Boulevard area
  • Webster Boulevard
  • Innisfil Beach Park

Lakeshore

  • Lefroy
  • Belle Ewart
  • Gilford
  • Big Bay Point
  • Shore Acres

Inland

  • Stroud
  • Cookstown
  • Churchill
  • Sixth Line corridor

Just Outside

  • South Barrie
  • Bradford
  • Bond Head
  • Thornton
  • Alliston

Not on the list? Call anyway. If we are already working nearby that week, the answer is usually yes. See the full list of municipalities we cover.

Google Reviews

What Clients Say

"Great experience with Paneless Glass Solutions. Security Protection was installed fast, clean, and gives me peace of mind when I'm away from the cottage. Would recommend to anyone considering it."

Richard B., Google Review

"From consultation to installation, everything was seamless. The smart glass is impressive, easy to use, and adds a luxury feel to our home. Would definitely recommend."

Elena N., Google Review

"Andrew and Wayne were very professional and knowledgeable with their work"

Brandon S., Google Review

Rated 5.0 from 4 reviews on Google, from clients across our service area. Reviews are shown exactly as written.

Questions

Innisfil Questions We Get Asked

Our house grade rejects 33% of solar heat and our premium grade rejects 51%, and both block 99% or more of UV. Those are the product ratings. What you get on your own windows depends on the glass, any Low-E coating and which way it faces, which is why we identify the glass before we quote.

It will not make glass unbreakable, and it is not a replacement for an alarm. What the 8-mil layer does is hold the glass together in the frame when it is struck, so getting through takes longer and makes a lot more noise. It works alongside your alarm and never needs to be armed.

We quote by grade and measured performance rather than by brand name. Every quote states the solar heat rejected, visible light and UV figures for the exact grade you are buying, so you can compare us line by line with anyone. Every covering carries a manufacturer warranty against bubbling, peeling, cracking and delamination, and we guarantee our workmanship for twelve months.

A lakefront living room wall is often a single day. A full Alcona two storey with privacy upstairs and solar control on the main floor runs two to three working days with our two-person crew. You get the schedule in writing before the deposit.

Nearly every Innisfil home built in the last fifteen years has Low-E glass, and it changes how the glass handles heat. Some coverings are rated for Low-E and some are not. We identify your exact glass at the site assessment and only quote what is safe to put on it.

Yes. Smart glass needs a low-voltage transformer and a power route to the glass, so it is quoted once we know the wiring path. Send us the glass sizes and a photo of the nearest outlet or power source and we will come back with written options.

Yes. Nothing is removed and nothing is ordered from a factory. The covering goes on the surface of the panes already in your frames, and the edges are left unsealed so the sealed unit can breathe and the builder warranty is not affected.

All of it: Alcona, Lefroy, Belle Ewart, Gilford, Big Bay Point, Stroud, Churchill and Cookstown. Innisfil is home ground, so there is no travel charge anywhere in town.

Innisfil projects start at about $1,200. That is the point where a full day with a two-person crew makes sense for both sides. If what you need is smaller, we will tell you on the phone instead of driving out to say it.

Interior work runs year round because we are working inside your heated space. Exterior applications need surface temperatures above roughly five degrees, so those are booked between April and October. January to March is the quietest stretch and the earliest dates.

Innisfil

Book an Innisfil Site Assessment

We measure, identify your glass and give you a written, fixed quote.

Request a Free Quote 705-481-3666

info@panelessglass.ca

Nearby: Barrie, Bradford, Georgina, Orillia. Or see every area we cover.